Uyilo lweBhodi yeFPGA PCB ephuculweyo

Inkcazelo emfutshane:

FPGA ibhodi pcb.Ibhodi ye-iCore4 engundoqo yolawulo lwemizi-mveliso yibhodi yesine yesizukulwana se-iCore esinebhodi engundoqo esungulwe yinkampani;ngenxa ye-ARM yayo ekhethekileyo + FPGA “ubukhulu obunye-ilingana-bonke” ubume obubini obungundoqo, inokusetyenziswa kumlinganiselo wovavanyo oluninzi kunye nemimandla yolawulo.Xa i-iCore4 isetyenziswe kwi-core of the product, i-"ARM" engundoqo isebenza njengendima ye-CPU (inokuthiwa "indima" yokubulawa kwe-serial), ejongene nokuphunyezwa komsebenzi, ukuqhutyelwa kwesiganeko, kunye nemisebenzi ye-interface.Njengendima "yesixhobo sokuqiqa" (okanye "indima ehambelanayo" yokwenziwa), undoqo we-"FPGA" unoxanduva lwemisebenzi efana nokucubungula ngokuhambelanayo, ukusetyenzwa kwexesha lokwenyani, kunye nolawulo lwengqiqo.Iicores ezimbini "ARM" kunye ne "FPGA" zinxibelelana zisebenzisa i-16-bit parallel bus.I-bandwidth ephezulu kunye nokulula kokusetyenziswa kwebhasi ehambelanayo iqinisekisa ukulungelelaniswa kunye nokusebenza kwexesha langempela lokutshintshiselana kwedatha phakathi kwee-cores ezimbini, okwenza i-cores ezimbini "ziphonswe kwintambo enye" ​​ukujamelana nemisebenzi ekhulayo yokuvavanya kunye nokulinganisa kunye ngokuzenzekelayo. iimveliso zolawulo , Iimfuno zokusebenza.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Iinkcukacha

Iimpawu ezi-2 zoovimba

2.1 Iimpawu zamandla:

[1] Yamkela i-USB_OTG, i-USB_UART kunye ne-EXT_IN iindlela ezintathu zobonelelo lwamandla;

[2] Ukunikezelwa kwamandla edijithali: Ukukhutshwa kombane wedijithali yi-3.3V, kwaye i-high-effective BUCK circuit isetyenziselwa ukubonelela amandla kwi-ARM / FPGA / SDRAM, njl.;

[3] I-FPGA engundoqo inikwe amandla yi-1.2V, kwaye isebenzisa i-high-effective BUCK circuit;

[4] I-FPGA PLL iqulethe inani elikhulu leesekethe ze-analog, ukwenzela ukuba kuqinisekiswe ukusebenza kwe-PLL, sisebenzisa i-LDO ukubonelela ngamandla e-analog kwi-PLL;

[5] I-STM32F767IG ibonelela ngereferensi yombane we-analog ezimeleyo ukubonelela ngombane wokubhekisela kwi-chip ADC / DAC;

[6] Ibonelela ngokujongwa kwamandla kunye nokulinganisa;

1

2.2 Iimpawu ze-ARM:

[1] Ukusebenza okuphezulu kwe-STM32F767IG kunye ne-frequency ephambili ye-216M;

[2] Ukwandiswa kwe-I / O ephezulu yokusebenza kwe-14;

[3] Ukuphindaphinda nge-I / O, kuquka i-ARM eyakhelwe ngaphakathi ye-SPI / I2C / UART / TIMER / ADC kunye neminye imisebenzi;

[4] Kubandakanya i-100M Ethernet, i-interface ye-USB-OTG enesantya esiphezulu kunye ne-USB kumsebenzi we-UART wokulungisa;

[5] Kubandakanya i-32M SDRAM, i-interface yekhadi le-TF, i-interface ye-USB-OTG (inokudityaniswa kwi-U disk);

[6] 6P FPC debugging interface, i-adapter eqhelekileyo ukulungelelanisa kwi-interface ye-20p jikelele;

[7] Ukusebenzisa i-16-bit parallel unxibelelwano lwebhasi;

2.3 Iimpawu zeFPGA:

[1] Isizukulwana sesine seCyclone se-Altera se-FPGA EP4CE15F23C8N sisetyenziswa;

[2] Ukuya kwi-230 yokwandiswa kwe-I / O ephezulu yokusebenza;

[3] I-FPGA yandisa i-sRAM ye-chip ezimbini kunye nomthamo we-512KB;

[4] Imo yoqwalaselo: inkxaso JTAG, AS, PS mode;

[5] Inkxaso yokulayisha iFPGA ngokusebenzisa uqwalaselo lwe-ARM;NJENGOKO umsebenzi wePS kufuneka ukhethwe ngokuxhuma;

[6] Ukusebenzisa i-16-bit parallel unxibelelwano lwebhasi;

[7] i-FPGA debug port: FPGA JTAG port;

2.4 Ezinye iimpawu:

[1] I-USB ye-iCore4 ineendlela ezintathu zokusebenza: Imodi ye-DEVICE, imodi ye-HOST kunye nemodi ye-OTG;

[2] Uhlobo lojongano lwe-Ethernet yi-100M epheleleyo duplex;

[3] Imowudi yonikezelo lwamandla inokukhethwa nge-jumper, i-interface ye-USB inikwe amandla ngokuthe ngqo, okanye nge-header ye-pin (umbane we-5V);

[4] Amaqhosha amabini azimeleyo alawulwa yi-ARM kunye ne-FPGA ngokulandelelana;

[5] Izibane ezimbini ze-LED ze-iCore4 ibhodi yokulawula i-industrial ye-double-core inemibala emithathu: ebomvu, eluhlaza kunye ne-blue, elawulwa yi-ARM kunye ne-FPGA ngokulandelanayo;

[6] Yamkela i-32.768K ikristale esebenzayo ukubonelela i-RTC yexesha langempela lewotshi yenkqubo;


  • Ngaphambili:
  • Okulandelayo:

  • Iimveliso ezinxulumeneyo